January 20- Laurens’s Windshield Installation
Need to catch up on these blog updates! Here is an old one from when we were re-installing Laurens’s windshields. It’s a very meticulous process, getting the rubber seals set just right and glued down, and then we’ll have to test them for leaking, and THEN, if no water gets in, the windshields are good! Phew. Fortunately, every windshield we install goes in smoother than the one before it.
Here’s Big Chief sorting through Laurens’ removed parts to determine which ones need cleaning/restoring before they are installed back onto the Mustang. Timbo is also repairing some of the damaged and missing studs that the windshield clips clip onto before we put the glass back in, and we are cleaning up a lot of interior parts in preparation for the re-assembly.
December 15- Laurens’ Glasswork and Water Test
Lot of stuff going on here! We checked out the trunk compartment after we did a lot of grinding to get rid of the surface rust, Big Chief did another water test on the cowl to make sure the seam seal is doing its job, and Savannah cleaned and wrapped the windshields until we get to the re-assembly stage.
December 11- Biff’s Glass and Parts Cleaning
Here’s Savannah cleaning some of Biff’s parts so they can be tagged and bagged and put away while the body is sandblasted, as well as Pat and Tim removing the windshields and wrapping them up for storage. Also some more tagged and bagged parts.
