mustangonlyone.com Blog » Phil- ’70 Boss

December 5- Phil’s Loading and Transport

Big Chief — Wed, 09 Dec 2009 20:07:34 +0000

Today’s the day! We’re loading up Phil’s boss and will be sending it to a cargo-shipping company to send it overseas, finally into its owner’s hands. We photographed all the boxes of parts and things, as well as all the documentation, going with the Mustang.

December 4- Phil’s Parts Packup

Big Chief — Wed, 09 Dec 2009 18:44:49 +0000

We’ve received a large order of parts from NPD (check them all out here) and have begun packing them up in preparation for their overseas journey.

December 1- Phil’s Used Parts

Big Chief — Sat, 05 Dec 2009 21:03:18 +0000

Here are pics of us loading Phil’s Boss with the used parts that aren’t on the Mustang but that Phil wants to hold on to.

November 12- Phil’s Transmission Installation

Big Chief — Fri, 20 Nov 2009 18:47:45 +0000

Phil’s transmission’s going back in, with a brand-new clutch. It will drive great after this! We also replaced the rear mounting brackets so the tranny will sit properly, and while we were down there we replaced the universal joints as well. The transmission has also been serviced, which includes a complete fluid flush and replacement. We’ll be testing the new clutch out in the next few days to make sure its up to standards…

November 11- Phil’s Transmission Service

Big Chief — Fri, 20 Nov 2009 18:36:49 +0000

Here we are servicing Phil’s transmission, doing a fluid drain and installation of the new clutch. We also found that the rear mounts for the transmission were badly worn and were dropping the tranny lower than it should go, so we had to replace them as well. We also took the opportunity to get pictures of the engine and tranny serial numbers, which are usually very hard to get to!

November 7- Phil’s Clutch Work

Big Chief — Sat, 14 Nov 2009 18:39:36 +0000

We have Phil’s new clutch, and have pulled his transmission, will do a bit of cleaning, and then will install the new clutch so his Boss runs all the better!

November 4- Phil’s Clutch Prep

Big Chief — Fri, 13 Nov 2009 18:32:13 +0000

We’ve begun disassembling the bell housing on Phil’s transmission in order to service the clutch before we ship this baby over to him. Here we are cleaning up his clutch and all the components we’ve removed before we do the necessary repairs.

October 27- Phil’s Inspection Continued

Big Chief — Fri, 06 Nov 2009 17:43:14 +0000

Phil’s Inspection Photos

Big Chief — Sat, 31 Oct 2009 19:57:49 +0000

Phil’s Boss just arrived, and, as is customary for all new projects we take on, we have completed an in-depth inspection photoshoot to ascertain the state of the Mustang.